Lithofin KF Cement Residue Remover

Concentrate: for removing grouting material residues.

Article number : 110
For interior and exterior use on ceramic surfaces such as fully vitrified tiles, quarry tiles, clay pavers, etc. Effortlessly removes cement and mortar residues, rust, lime, efflorescence and other hardened dirt layers.
Product type: acidic cleaner
  • concentrate - high yield
  • fast acting
  • low on odour
Coverage approx. 20 to 30 m²/L
Stocking closed, cool, up to 4 years
Stocking 1 L, 5 L
  • pdf
    Technical Information - Lithofin KF Cement Residue Remover (AUSNZ)
  • pdf
    Material Safety Data Sheet - Lithofin KF Cement Residue Remover (AUS)
    293 KB

The grey film can be removed with Lithofin KF Cement Residue Remover. Depending on the type of terracotta and the stubbornness of the deposits, dilute the product 1:20 with water. Then apply the solution, allow it to work briefly, brush and rinse off the surface with plenty of water.

Sometimes, the polished tiles are not thoroughly cleaned off when they leave the factory and there are still residues from the polishing process. These residues can be removed with acidic cleaners such as Lithofin KF Cement Residue Remover.

Different browser language detected

We have detected that your browser supports a different language than the one currently being displayed. Our website is also available in your language. Would you like to switch to your language?

Switch to language