Apply Lithofin WAX-OFF undiluted and allow it to work for 5-10 minutes. Add some water, brush, and then remove the product. Rinse thoroughly with clear water. You may have to repeat this procedure. In case of stubborn, deep-seated stains apply Lithofin OIL-EX in a 2 mm thick layer to the dry surface and cover it with some foil. Remove the foil after about 12 hours and brush off the white powder after one more hour.
Lithofin MN Colour Intensifier has probably been applied too generously. The stone could not absorb the quantity of product and the product residues formed puddles which dried on the surface. This surface film can be dissolved with Lithofin MN Colour Intensifier. Simply reapply the product and ensure an even distribution. After 5 to 10 minutes, remove all surface residues with a dry cloth. The colour intensifying effect and the impregnator’s effectiveness remain intact. Alternatively, you can remove the impregnator entirely with Lithofin WAX-OFF. Apply the product with a brush and allow it to work for 15 to 20 minutes scrubbing occasionally. The rinse the surface with plenty of clear water.
Grease splashes and vapours penetrate into the porous grouting material and with time turn them dark and unsightly. Lithofin KF Grout Cleaner dissolves and removes these deposits. However, oil and grease turn into resin with time, and they become more and more difficult to remove as time goes by. The clean joints should then be treated with Lithofin KF Grout Protector. This protective treatment will prevent the penetration of oil and grease.
First you should thoroughly clean the surface with an intensive cleaner. If the slippery surface was due to layer forming care products, the problem should now be solved. If the surface is still to slippery, you can use Lithofin Anti-Slip to “roughen” up the surface. The product removes microscopically small silicate particles from the stone / tile, thereby giving it more grip. Lithofin Anti-Slip is available in a convenient Set which includes all the equipment you will need to treat 6m².
At first glance, natural stone surfaces look dense and robust. However, the stone contains pores and capillaries, which allow dirt to penetrate the surface. A protective treatment like Lithofin MN Stain-Stop (or Lithofin STAINSTOP >W