Lithofin MN Colour Intensifier

For rough, absorbent natural and concrete stones.

Article number : 167
Improves the appearance of rough, absorbent natural and concrete stone surfaces. Enhances the colour, accentuates the structure, and makes water and dirt repellent.
Product type: solvent based protective impregnator
  • matte
  • ideal for concrete slabs and pavers
  • can be applied several times
Coverage approx. 7 to 15m²/L
Stocking closed, cool, dry, up to 4 years
Packaging 1 L, 5 L
  • pdf
    Technical Information - Lithofin MN Colour Intensifier (GB)
    159 KB
    download
  • pdf
    Material Safety Data Sheet - Lithofin MN Colour Intensifier (GB)
    390 KB
    download

Generously apply Lithofin MN Colour Intensifier to the clean and completely dried out surface. In addition to giving the surface a deep and rich colour, Lithofin MN Colour Intensifier also acts as a protective treatment against water and dirt.

Note: Also suitable for all porous natural stones.

Lithofin MN Colour Intensifier has probably been applied too generously. The stone could not absorb the quantity of product and the product residues formed puddles which dried on the surface.

This surface film can be dissolved with Lithofin MN Colour Intensifier. Simply reapply the product and ensure an even distribution. After 5 to 10 minutes, remove all surface residues with a dry cloth. The colour intensifying effect and the impregnator’s effectiveness remain intact.

Alternatively, you can remove the impregnator entirely with Lithofin WAX-OFF. Apply the product with a brush and allow it to work for 15 to 20 minutes scrubbing occasionally. The rinse the surface with plenty of clear water.

Different browser language detected

We have detected that your browser supports a different language than the one currently being displayed. Our website is also available in your language. Would you like to switch to your language?

Switch to language